Follow the steps in this article to enter the Jeppesen subscription number on a Pro Line 21 or Pro Line Fusion Integrated Flight Information System.

Pro Line 21

The following is an excerpt from the Collins Aerospace IFIS-5000 Integrated Flight Information System Operator's Guide

IFIS-5000 Display Operation (AFD-3010E)
Chart Subscription Page (AFD-3010E)
pages 4-23 to 4-28

CHART SUBSCRIPTION PAGE (AFD-3010E)

SUMMARY:
The Chart Subscription page contains a data entry field, a list of enabled regions, and an ADD REGIONS data entry field. Regions are added to the list by entering temporary access codes. Up to seven temporary access codes can be entered. Both the subscription number and access codes are obtained from Jeppesen (refer to page 11-3 for contact information).

1. Push the STAT or DATA BASE button on the CCP to display the STATUS MENU on the MFD.
   
   Pro Line 21 Cursor Control Panel (CCP)
   
   
   NOTE: The STAT button may be labeled DATA BASE, depending on the installation. Operation is as described above regardless of the button label.
   
   NOTE: In some installations, pushing the STAT button brings up the last selected status format. Push the MENU button on the CCP to show the STATUS MENU with a status format in view.
   
   
   
   
   
   TECH DETAIL: The STATUS MENU is automatically removed from the display after 10 seconds of no activity.
   
   
2. Turn the MENU ADV knob on the CCP to position the cursor around the CHART SUBSCRIPTION list item.
   
   
   
   
   
   
   
3. Push the PUSH SELECT button on the CCP to select the CHART SUBSCRIPTION page.
   
   
   
   
   
   
   
4. Follow the steps of either the Enter Subscription Number or the Add a Region checklists as appropriate to enter the Jeppesen subscription number or add regions to the chart coverage.
5. To exit the CHART SUBSCRIPTION page, select another display format on the MFD.
   
   NOTE: In some installations, operation of the STAT button removes the current status format from display, returning the display to the last normal format.
   
   

ENTER SUBSCRIPTION NUMBER

SUMMARY:
On the Chart Subscription page, the SUBSCRIPTION NUMBER data entry field is used to enter the Jeppesen subscription serial number. This operation is only available when the aircraft is on the ground.

1. Turn the MENU ADV knob on the CCP to position the menu cursor around the subscription number.
   
   
   
   
   
   
2. Push and hold the PUSH SELECT button on the CCP to activate the text entry cursor and to position the cursor around the first character of the entry field.
   
   
   
   
   
   
3. Turn the DATA knob on the CCP to change the character.
   
   
   
   
4. Turn the MENU ADV knob to move the cursor to the next character field.
   
   
   
   
5. Repeat steps 3 and 4 as required to enter all the characters of the subscription number.
   
   
   
   
   
6. Do either of the steps that follow to terminate the data entry mode:
   1. Push the PUSH SELECT button on the CCP to finish entering the subscription number and have the system process the information.
      
      NOTE: Entering or changing a subscription number can take up to two minutes to process.
      
      
      
      
      
      
      
   2. Push the ESC button to cancel data entry mode and keep the previous value.
      
      NOTE
      Operation of the ESC button on the CCP or removal of the menu due to another control selection will abort the data entry without processing the value. When a data entry abort occurs, the subscription serial number is either returned to the previous value or to zeros if no previous value is available.
      
      
7. To exit the CHART SUBSCRIPTION page, select another display format on the MFD.

Pro Line Fusion:

The following is an excerpt from the Collins Aerospace IFIS-5000 Pro Line Fusion Operator's Guide

IFIS-5000 Pro Line Fusion
Chart Subscriptions and Access Codes
pages 7-1 to 7-4

UPDATE SUBSCRIPTIONS AND SET ACCESS CODES

The E-Chart subscription is set through the Main Task menu. The CHART SUBSCRIPTION dialog box includes the option to add regions by updating the access code. The subscriptions can only be updated while on the ground. Values entered on the MKP are shown automatically in the entry field readout window. Each valid subscription number is 16 characters, and each access code is 10 characters. There is a maximum of 15 regions to enable. To set the subscription and access code:

1. CHART button – Push.
2. MENU button – Push.
3. Position the cursor over CHARTS, and push the PUSH ENTER button.
4. Position the cursor over SUBSCRIPTION, and push the PUSH ENTER button. The CHART SUBSCRIPTION dialog box shows.
   
   
   
   
   
5. Position the cursor over SUBSCRIPTION NUMBER field, and push the PUSH ENTER button. The CONFIRM SELECTION dialog box opens.
   
   
   
   
   
6. Position the cursor over the YES button, and push the PUSH ENTER button. The CONFIRM SELECTION dialog box disappears.
   Position the cursor over the lower data entry field.
7. Enter the subscription number, and push the ENTER button on the MKP.
8. Position the cursor over the ACCESS CODE button, and push the PUSH ENTER button. A cyan field opens below the ADD REGIONS field.
   Position the cursor over the new lower data entry field.
9. Enter the access code, and push the ENTER button on the MKP.
   The REGIONS ENABLED window populates with available options.
10. Repeat the prior steps for each region to be added.

VERIFY SUBSCRIPTIONS AND ACCESS CODES

After the subscriptions and access codes are loaded, access any chart in the selected region to determine if the database is loaded correctly.

1. Position the cursor over the OTHER button, and push the PUSH ENTER button.
2. Position the cursor over the FIND AIRPORT IDENTIFIER field, and push the PUSH ENTER button. The OTHER AIRPORT menu shows.
3. Enter a valid ICAO identifier.
4. Position the cursor over a drop down list ( ), and push the PUSH ENTER button. A Chart list shows.
5. Position the cursor over a chart identifier, and push the PUSH ENTER button.
6. Verify the correct chart shows.